CFXYL - 10720 LIQUID HARDENER 0202

  • MSDS: CFXYL
  • Manufacturer: DEVCON CORP
  • Product Name: 10720 LIQUID HARDENER 0202
  • National Stock Number: 8030-00F054480
Product Identification

Product ID:10720 LIQUID HARDENER 0202
MSDS Date:02/14/1996
FSC:8030
NIIN:00F054480
MSDS Number: CFXYL

Responsible Party
DEVCON CORP
30 ENDICOTT ST
DANVERS, MA 01923-3753
US

Emergency Phone: 508-777-1100

Info Phone: 508-777-1100

Cage: 16059

Contractor
DEVCON CORP
DANVERS, MA 01923-3753 US

Telephone: 1-508-777-1100

Cage: 16059

Ingredients

TRIETHYLENETETRAMINE, EPOXY HARDNER

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 30-60%


DIMER FATTY ACIDS, TALL OIL FATTY ACIDS,

CAS: 68082-29-1

Fraction By Weight: 50-65%


NONYL PHENOL *97-2*

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 5-20%


N-AMINOETHYLPIPERAZINE, 1-PIPERAZINEETHANAMINE,

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 1-15%

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT): 1620 MG/KG NONYLPHENOL
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE SEVERE IRRITATION &
SENSITIZATION. EYES: MAY CAUSE SEVERE IRRITATION, CONJUNCTIVITIS,
CORNEAL DAMAGE. INHALATION: MAY CAUSE IRRITATION OF NOSE & THROAT.
INGESTION: MAY CAUSE IRRITATION OF MOUTH, THROAT & GI TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA, VOMITING, ITCHING, RASHES,
SWELLING, SORE THROAT, FAINTNESS, HEADACHE, DEFATTING, CORROSION.
Medical Cond Aggravated by Exposure:EYE DISEASES, SKIN DISORDERS,
ALLERGIES.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE CPR/OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. DILUTE
W/MIL K/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:WATER, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:AVOID PERSONAL CONTACT. REMOVE IGNITION
SOURCES. VENTILATE AREA. DIKE, CONTAIN & ABSORB W/CLAY, SAND/OTHER
SUITABLE MATERIAL. LARGE: PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP
RESIDUE W/AN ABSORBENT SUC H AS CLAY, SAND/OTHER SUITABLE MATERIAL.
(SUPP)

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA AWAY FROM
HIGH TEMPS & FLAMES. HANDLE MIXED RESIN & HARDENER IAW/POTENTIAL
HAZARD OF CURING AGENT USED.
Other Precautions:AVOID CONTACT W/SKIN, EYES/CLOTHING. PROVIDE
APPROPRIATE VENTILATION/RESPIRATORY PROTECTION AGAINST
DECOMPOSITION PRODUCTS DURING WELDING/FLAME CUTTING OPERATIONS & TO
PROTECT AGAINST NUISANCE DUST DU RING SANDING/GRINDING OF CURED
PRODUCT.

Exposure Controls

Respiratory Protection:NONE NEEDED IN NORMAL USE W/PROPER VENTILATION.
WEAR A NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IN POORLY VENTILATED
AREAS/WHEN CREATING A DUST/MIST.
Ventilation:LOCAL EXHUST: RECOMMENDED FOR PROLONGED/REPEATED USE.
MECHANICAL (GENERAL): ADEQUATE FOR OCCASIONAL USE.
Protective Gloves:NEOPRENE, BUTYL RUBBER/NITRILE
Eye Protection:REQUIRED
Other Protective Equipment:SAFETY GLASSES W/SIDE SHIELDS/CHEMICAL
GOGGLES, OTHER PROTECTIVE CLOTHING, EMERGENCY SHOWER, EYE WASH
STATION
Work Hygienic Practices:REMOVE/CLEAN CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING. DISCARD CONTAMINATED LEATHER
ARTICLES.
Supplemental Safety and Health
SPILLS: FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE. PREVENT FROM
ENTERING DRAINAGE/SEWER SYSTEMS, WATERWAYS & SURFACE WATERS.

Chemical Properties

Boiling Pt:B.P. Text:>450F
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.98
pH:10-11
Evaporation Rate & Reference:(BU AC =1): <1
Solubility in Water:30-80%
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT/OPEN FLAME, OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:ACID & TOXIC FUMES W/ORGANIC AMINES,
AMMONIA, OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS PRODUCT
IS MIXED W/EPOXY RESINS. USE CARE WHEN MIXING LARGE QUANTITIES.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.